Agilent 5973N MSD with 6890 (FID) GC and 2 in 1 Liquid & Headspace Sampler
For analysts looking for an all-in-one GC/MS package, the Agilent 5973N MSD benchtop system is the perfect fit. The 5973N is the workhorse of the mass spec world with unmatched reliability, ruggedness, long-life, and service support. Improving on previous models, the 5973N incorporates LAN communication between the instrument and the GC/MS ChemStation.
This Agilent 5973N GC/MSD System with 6890 GC comes fully refurbished and tested at GenTech Scientific.
- Greater mass stability – better than 0.10 amu over 48 hours
- Performance electronics for 10,000 amu/s scan speed (8,000 amu/s write-to-disk)
- Enhanced software
- RTL-ready (Retention Time Locking, a unique Agilent feature that allows creation of permanent and universal methods)
- Independently heated transfer line, source, quad
- Proprietary hyperbolic gold-coated quadrupole
- Heatable quadrupole to 200°C
- High energy dynode (HED) and electron multiplier detector
2 in 1 Liquid & Headspace Sampler for GC Systems
You don't need more than one autosampler to automate your GC. The all in one autosampler combines the functions of an autosampler for liquid and headspace in a single unit. The rotating tower leaves the injector port free for inlet maintenance. This approach keeps the samples away from any heated source. In fact, the sample rack is mounted away from the GC oven to prevent exposure to high temperatures, which could cause degradation or condensation in the sample vial. The robotic vial processing operation allows for sample analysis in a straight forward and systematic way. Sample vials are transported into the heated six-position incubator for preconditioning.
- Syringe volume:0.5, 1, 5, 10, 25, 50 and 100µl
- Sample volume: as low as step of 0.1µl
- Air volume: as low as step of 0.1µl
- Filling speed: 1-100µl/sec
- Viscosity delay: 0-15s
- Bubble elimination: up to 15 pull up strokes
- Injection speed: 1-100ml/sec
- Solvent capacity: 6x10ml vials
- Syringe volume: 2.5ml (standard); optional: 1ml
- Syringe temperature: ambient; 40–150℃
- Sampe volume: steps of 0.01ml
- Sample homogenization: up to 15
- Sample speed: 0.5–100ml/min
- Comparable to Agilent & CTC samplers
- Easy to use
Expertly refurbished used laboratory instruments
Every instrument we sell undergoes a complete inspection of all electronics and performance review. The instruments undergo in-depth preventative maintenance procedures that include extensive cleaning, detector maintenance, line and pump flushing. Routine maintenance is also addressed and filters, liners, tubing, etc. are all replaced as needed. Our chemist perform full calibration and data verification. The once used Agilent GC/MS Systems are returned to like-new condition and will run your samples for 30-80% less than OEM pricing.
This refurbished Agilent 5973N MSD with 6890 (FID) GC and 2 in 1 Liquid & Headspace Sampler is calibrated to meet OEM standards. Our expert service engineers and chemists can install and custom configure the system to be compliant with the Methods you plan to run.
The GenTech Difference
Why Buy New When You Don't Have To? Our refurbished Agilent GC/MS Systems have been expertly restored to meet OEM standards. GenTech is a full service reseller, our knowledgeable engineers perform installations, repairs, training and application setup. The inventory in our 60,000 sq. foot facility is constantly changing with new shipments coming in daily. GenTech customers receive lifetime phone support for all instruments they purchase.
Get cash or purchase credit for your unwanted laboratory assets!
GenTech buys a wide range of equipment from Agilent, Thermo, Waters, AB Sciex, Shimadzu, Perkin Elmer, and More! Since 1996 GenTech Scientific has purchased used laboratory equipment to refurbish and resell with 1 Year warranties. Our refurbished equipment comes fully tested, and supported long after the manufacturers! If you have old or unused lab equipment in your laboratory that you are looking to sell, contact GenTech and see how we can help you!
Trade-In for Purchase Credit
Apply your trade-in value towards your next purchase! Learn more about Trade-In's.
If you have a trade-in complete the quote request form including the instruments you wish to purchase and the equipment you have to trade. Click here to Request a Quote.
Sell Your Lab Equipment
GenTech is currently interested in purchasing GC, HPLC, MS, LC/MS, ICP/MS equipment and laboratory accessories! Click Here to see a complete list.
To sell your equipment please include the make, model and pictures of the instruments you have to sell. Click here to Contact the Purchasing Department.