Agilent 5973 MSD with 6890 GC and Automatic Liquid Sampler

Two Year Warranty Available

Manufacturer: Agilent Technologies

Includes

  • Agilent 5973 MSD with 6890 GC
    • EI Source
    • HPIB Communications
    • Mass range of 1.6-800 amu
    • Single Split/Splitless injector
    • Electronic Pressure Control (EPC)
    • G1701 Data System
    • 110v Diffusion pump
    • New roughing pump
    • Ninety (90) Day Warranty
  • NEW Automatic Liquid Sampler (HT3200A)
    • 209 position sample (121 & 88 racks) for 2ml vials
    • Syringe volume: 10μl
    • Sample volume: as low as step of 0.1μl
    • Air volume: as low as step of 0.1μl
    • Filling speed: 1-100μl/sec
    • Viscosity delay: 0-15s
    • Bubble elimination: up to 15 pull up strokes
    • LAN and TTL electrical control
    • Touch Screen
    • Starter Kit: sample vials, caps, septa (10pcs)
    • Solvent & Waste vial Kit: Vials, Caps, Septa (1set)
    • GC Mounting Kit & Cables
    • Autosampler Manager Software
    • Preventative Maintenance Kit - Link
    • User Manual
    • Fifteen (15) Month Warranty

Options:

  • Two (2) Year Warranty:
    • Included with Installation & PM Purchase
  • Familiarization
  • 2 in 1 Liquid & Headspace Sampler
  • Security Plus Series UPS 7200W - Battery Back-up Power Supply
  • Mass Spec Workbench with Mass Spec QuietBox II

More details

Item#: 11577
Condition: Refurbished

Protection & Services

Repair Service
Instrument not working properly?
Get a Free Quote Estimate Today
Repair Service
Not exactly what you are looking for?
Build your own custom system

Agilent 5973 MSD with 6890 GC and Automatic Liquid Sampler

For analysts looking for an all-in-one GC/MS package, the Agilent 5973 MSD benchtop system is the perfect fit. The 5973 is the workhorse of the mass spec world with unmatched reliability, ruggedness, long-life, and service support. Improving on previous models, the 5973 incorporates HPIB communication between the instrument and the GC/MS ChemStation.

This Agilent 5973 GC/MSD System with 6890 GC comes fully refurbished and tested at GenTech Scientific.

Features:

  • Greater mass stability – better than 0.10 amu over 48 hours
  • Performance electronics for 10,000 amu/s scan speed (8,000 amu/s write-to-disk)
  • Enhanced software
  • RTL-ready (Retention Time Locking, a unique Agilent feature that allows creation of permanent and universal methods)
  • Independently heated transfer line, source, quad
  • Proprietary hyperbolic gold-coated quadrupole
  • Heatable quadrupole to 200°C

NEW Automatic Liquid Sampler for GC Systems - 209 Positions

Due to its 209 2mL sample vials, the Liquid GC Autosampler is setting a new standard in the market. Samples are organized in two racks that can be easily removed for sample loading or preparation, or to be stored elsewhere. An integrated Bar Code Reader can be available with every Liquid GC Autosampler unit, offering full and detailed sample tracking. The Liquid GC Autosampler features the innovative SyringeID, a proprietary technology based on RFID tags. The SyringeID is able to identify syringes in an univocal way; thereby preventing errors when mounting a syringe, preventing syringe volume mismatching and keeps track of the syringe consumption (preventive maintenance counters). The SyringeID system is able to provide you with a level of confidence never previously achieved by identification systems based on syringe carriers.

It can be configured to serve up to two injectors in most supported GCs. The rotating tower leaves the injector port free for manual injection or maintenance. In addition to avoiding any complicated sample vial transfer procedures, this approach keeps the samples away from any heated source. In fact, the sample rack is mounted away from the GC oven to prevent exposure to high temperatures, which could cause degradation or condensation in the sample vial. The self-aligning “plug and play” Liquid GC Autosampler mounts in seconds, without tools. It can be easily moved between GCs when workloads change, due to its easy positioning, repositioning and easy removal.

Features: 

  • 209 position sample (121 & 88 racks) for 2ml vials
  • Syringe volume: 10μl
  • Sample volume: as low as step of 0.1μl
  • Air volume: as low as step of 0.1μl
  • Filling speed: 1-100μl/sec
  • Viscosity delay: 0-15s
  • Bubble elimination: up to 15 pull up strokes
  • LAN and TTL electrical control
  • Touch Screen
  • Comparable to Agilent
  • Easy to use

Expertly refurbished used laboratory instruments

Every instrument we sell undergoes a complete inspection of all electronics and performance review. The instruments undergo in-depth preventative maintenance procedures that include extensive cleaning, detector maintenance, line and pump flushing. Routine maintenance is also addressed and filters, liners, tubing, etc. are all replaced as needed. Our chemist perform full calibration and data verification. The once used Agilent GC/MS Systems are returned to like-new condition and will run your samples for 30-80% less than OEM pricing.

This refurbished Agilent 5973 MSD with 6890 GC and Automatic Liquid Sampler is calibrated to meet OEM standards. Our expert service engineers and chemists can install and custom configure the system to be compliant with the Methods you plan to run.

The GenTech Difference

Why Buy New When You Don't Have To? Our refurbished Agilent GC/MS Systems have been expertly restored to meet OEM standards. GenTech is a full service reseller, our knowledgeable engineers perform installations, repairs, training and application setup. The inventory in our 60,000 sq. foot facility is constantly changing with new shipments coming in daily. GenTech customers receive lifetime phone support for all instruments they purchase.

Get cash or purchase credit for your unwanted laboratory assets!

GenTech buys a wide range of equipment from Agilent, Thermo, Waters, AB Sciex, Shimadzu, Perkin Elmer, and More! Since 1996 GenTech Scientific has purchased used laboratory equipment to refurbish and resell with 1 Year warranties. Our refurbished equipment comes fully tested, and supported long after the manufacturers! If you have old or unused lab equipment in your laboratory that you are looking to sell, contact GenTech and see how we can help you!

Trade-In for Purchase Credit

Apply your trade-in value towards your next purchase! Learn more about Trade-In's.

If you have a trade-in complete the quote request form including the instruments you wish to purchase and the equipment you have to trade. Click here to Request a Quote.

Sell Your Lab Equipment

GenTech is currently interested in purchasing GC, HPLC, MS, LC/MS, ICP/MS equipment and laboratory accessories! Click Here to see a complete list.

To sell your equipment please include the make, model and pictures of the instruments you have to sell. Click here to Contact the Purchasing Department.

flags Acerca de GenTech - Ver Mas