Agilent 1290 Autosampler Thermostat (G1330B)
The Agilent 1290 Infinity Thermostat is designed for use with other modules of the Agilent 1200 Infinity Series or with other LC systems if adequate remote control inputs and outputs are available. The thermostat is controlled from the Agilent 1200 Infinity Series Instant Pilot or from your Agilent control software for LC systems. The specially- designed thermostattable sample trays holds either 100 × 1.8 mL vials or two wellplates and 10 × 1.8 mL vials. The thermostat contains Peltier- controlled heat exchangers. A fan draws air from the area above the sample vial tray of the autosampler and then blows it through the fins of the cooling/heating module. There it is cooled or heated according to the temperature setting. The thermostatted air enters the autosampler through a recess underneath the specially- designed sample tray. The air is then distributed evenly through the sample tray ensuring effective temperature control, regardless of how many vials are in the tray. In cooling mode condensation is generated on the cooled side of the Peltier elements. This condensed water is safely guided into the leak system.
- Line frequency: 50 or 60 Hz, ± 5 %
- Temperature range: Settable from 4 °C to 40 °C in 1 ° increments
- Temperature accuracy at ambient temperatures < 25 °C and humidity < 50 %: 3 °C to 8 °C at a setpoint of 4 °C*
- Temperature accuracy at ambient temperatures < 30 °C and humidity < 60 %: 3 °C to 9 °C at a setpoint of 4 °C*
Expertly refurbished used laboratory instruments
Every instrument we sell undergoes a complete inspection of all electronics and performance review. The instruments undergo in-depth preventative maintenance procedures that include extensive cleaning, detector maintenance, line and pump flushing. Routine maintenance is also addressed and filters, liners, tubing, etc. are all replaced as needed. Our chemist perform full calibration and data verification. The once used Agilent HPLC Module are returned to like-new condition and will run your samples for 30-80% less than OEM pricing.
This refurbished Agilent 1290 Autosampler Thermostat (G1330B) is calibrated to meet OEM standards. Our expert service engineers and chemists can install and custom configure the system to be compliant with the Methods you plan to run.
The GenTech Difference
Why Buy New When You Don't Have To? Our refurbished Agilent HPLC Module have been expertly restored to meet OEM standards. GenTech is a full service reseller, our knowledgeable engineers perform installations, repairs, training and application setup. The inventory in our 60,000 sq. foot facility is constantly changing with new shipments coming in daily. GenTech customers receive lifetime phone support for all instruments they purchase.
Get cash or purchase credit for your unwanted laboratory assets!
GenTech buys a wide range of equipment from Agilent, Thermo, Waters, AB Sciex, Shimadzu, Perkin Elmer, and More! Since 1996 GenTech Scientific has purchased used laboratory equipment to refurbish and resell with 1 Year warranties. Our refurbished equipment comes fully tested, and supported long after the manufacturers! If you have old or unused lab equipment in your laboratory that you are looking to sell, contact GenTech and see how we can help you!
Trade-In for Purchase Credit
Apply your trade-in value towards your next purchase! Learn more about Trade-In's.
If you have a trade-in complete the quote request form including the instruments you wish to purchase and the equipment you have to trade. Click here to Request a Quote.
Sell Your Lab Equipment
GenTech is currently interested in purchasing GC, HPLC, MS, LC/MS, ICP/MS equipment and laboratory accessories! Click Here to see a complete list.
To sell your equipment please include the make, model and pictures of the instruments you have to sell. Click here to Contact the Purchasing Department.