Agilent 1200 Autosampler Thermostat (G1330B)

Agilent 1200 Autosampler Thermostat (G1330B)

The Agilent 1200 Series autosampler is designed for use with other modules of the Agilent 1200 Series LC system or with other LC systems if adequate remote control inputs and outputs are available. The autosampler is controlled from the Agilent 1200 Series control module or from the Agilent ChemStation for LC systems.

The specially-designed thermostattable sample trays holds either 100 × 1.8 ml vials or two wellplates and 10 × 1.8 ml vials.

The autosampler thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial tray of the autosampler and is then blown through the fins of the cooling/heating module. There it is cooled or heated according to the temperature setting. The thermostatted air enters the autosampler through a recess underneath the specially-designed sample tray. The air is then distributed evenly through the sample tray ensuring effective temperature control, regardless of how many vials are in the tray.

Specification

• Line frequency: 50 or 60 Hz, ± 5%
• Temperature range: setable from 4 °C to 40 °C in 1 ° increments
• Temperature accuracy at ambient temperatures < 25 °C and humidity < 50 %: - 1°C to + 4 °C at a setpoint of 4 °C
• Temperature accuracy at ambient temperatures < 30 °C and humidity < 60 %:  - 1°C to + 5 °C at a setpoint of 4 °C