Nitrogen Evaporator & Concentrator

Nitrogen Evaporator & Concentrator

This Nitrogen Evaporator (Model AT-EV-50) is a tabletop precision sample concentrator by nitrogen purging. It is a newly designed Sample Concentrator for multiple sample pre-concentration of in organic media.  The unit can be set to a constant Flow and constant Temperature to ensure good evaporation.

It is fully microprocessor controlled and water bath, Temperature, gas station, more advantage LCD display, over Temp. Heater ON/OFF LED, door open display, high-temperature Thermal Contour for safety for best quality and best performs.

Features:

• Vortex Shearing Concentration
• Time Range: 15 sec to 10 hours
• Time Set-up / down arrow keys (15-sec increments)
• Temperature range: Ambient to 99ºC (thermal cutout for safety)
• Temperature set-up / down arrow keys (1 °C increment)
• Start/stop: Green LED indication when process is On
• Display: LCD (Digital)
• Gas stations  5 Nos. with LED indication
• Gas regulator range: 0 to 100 PSI (approximate)
• Pressure gauge range: 0 to 100 PSI
• Controlled: Fully Microprocessor based
• Sample capacity: 50 Nos. (AT-EV-50)
• Gas Line: 5 Nos  / 2 Nos
• Error indication: LED indication with Buzzer

Specifications:

• Test Tube Type: Round Surface
• Water tank capacity: 6.5 Ltr. (Not over flow)
• Dimensions : 30cm(H) x 40cm(W) x 55cm(L)
• Weight: 20 Kgs (empty tank)
• Gas supply: Laboratory grade nitrogen
• Inlet pressure: 60 PSI minimum, 100 PSI maximum (And ON/OFF control valve)
• Exhaust: Exhaust duct outlet or fume hood – the exhaust duct must go outside the lab.

Rack Type Options:

• 12mm x 75mm, 04 ml, Round Surface
• 12mm x 100mm, 05 ml, Round Surface
• 16mm x 100mm, 10ml, Round Surface
• 15mm x 125mm, 11ml, Round, Conical
• 15mm x 150mm, 12ml, Round Surface
• 17mm x 125mm, 15ml, Round Surface
• 17mm x 150mm, 16ml, Round Surface
• 18mm x 150mm, 20ml, Round Surface
• 20mm x 150mm, 30ml, Round Surface
• 25mm x 150mm, 40ml, Round Surface