Cannabis Terpenes Testing GC/MS with Autosampler
This GC/MS System is used to analyze the Terpene content in Cannabis. Terpene analysis can profile such Terpenoids as Linalool, Citronellol, Carophyllene Oxide, Myrcene, Terpinolene, Limonene, Alpha Pinene, Alpha Humulene, Beta Carophyllene & Phytol.
Accurate, reproducible quantitation. Fast scan speed and a response that is linear over 4 orders of magnitude assure accurate, reproducible quantitation, even in complex sample matrices such as wastewater, food, and physiological fluids. The programmable temperature vaporization (PTV) inlet offered with the HP 6890 Series GC expands the limits of GC/MS detection by allowing large-volume injections, up to 1 mL.
Productive, time-saving tools. The HP MSD Productivity ChemStation software automates routine instrument control and data interpretation tasks for high productivity. Moreover, the system can be completely automated, from injection through final report, for unattended operation, 24 hours a day.
- Mass range: Scans any mass range between 1.6 - 800 amu in 0.1-amu steps.
- Dynamic range: Linear Dynamic Range: Calibration curves are linear over 4 orders of magnitude. Total ADC dynamic range is 6 orders of magnitude.
- Full scan sensitivity - electron impact ionization: 1 pg of octafluoronaphthalene shall yield a signal-to-noise ratio of at least 10:1 RMS.
- Selected ion monitoring (SIM) sensitivity - electron impact ionization: 20 fg of octafluoronaphthalene shall yield a signal-to-noise ratio of at least 10:1 RMS when 272 m/z is monitored.
- EI Source
- MS features a mass range of 10-800 amu
- Heated Source and Transferline
- Heated Hyperbolic Quadrupole Mass Filter
- High-Energy Dynode (HED) Electron Multiplier Detector
NEW Automatic Liquid Sampler for GC Systems - 209 Positions
Due to its 209 2mL sample vials, the Liquid GC Autosampler is setting a new standard in the market. Samples are organized in two racks that can be easily removed for sample loading or preparation, or to be stored elsewhere. An integrated Bar Code Reader can be available with every Liquid GC Autosampler unit, offering full and detailed sample tracking. The Liquid GC Autosampler features the innovative SyringeID, a proprietary technology based on RFID tags. The SyringeID is able to identify syringes in an univocal way; thereby preventing errors when mounting a syringe, preventing syringe volume mismatching and keeps track of the syringe consumption (preventive maintenance counters). The SyringeID system is able to provide you with a level of confidence never previously achieved by identification systems based on syringe carriers.
It can be configured to serve up to two injectors in most supported GCs. The rotating tower leaves the injector port free for manual injection or maintenance. In addition to avoiding any complicated sample vial transfer procedures, this approach keeps the samples away from any heated source. In fact, the sample rack is mounted away from the GC oven to prevent exposure to high temperatures, which could cause degradation or condensation in the sample vial. The self-aligning “plug and play” Liquid GC Autosampler mounts in seconds, without tools. It can be easily moved between GCs when workloads change, due to its easy positioning, repositioning and easy removal.
- 209 position sample (121 & 88 racks) for 2ml vials
- Syringe volume: 10μl
- Sample volume: as low as step of 0.1μl
- Air volume: as low as step of 0.1μl
- Filling speed: 1-100μl/sec
- Viscosity delay: 0-15s
- Bubble elimination: up to 15 pull up strokes
- LAN and TTL electrical control
- Touch Screen
- Comparable to Agilent
- Easy to use
Expertly refurbished used laboratory instruments
Every instrument we sell undergoes a complete inspection of all electronics and performance review. The instruments undergo in-depth preventative maintenance procedures that include extensive cleaning, detector maintenance, line and pump flushing. Routine maintenance is also addressed and filters, liners, tubing, etc. are all replaced as needed. Our chemist perform full calibration and data verification. The once used Application Solutions are returned to like-new condition and will run your samples for 30-80% less than OEM pricing.
This refurbished Cannabis Terpenes Testing GC/MS with Autosampler is calibrated to meet OEM standards. Our expert service engineers and chemists can install and custom configure the system to be compliant with the Methods you plan to run.
The GenTech Difference
Why Buy New When You Don't Have To? Our refurbished Application Solutions have been expertly restored to meet OEM standards. GenTech is a full service reseller, our knowledgeable engineers perform installations, repairs, training and application setup. The inventory in our 60,000 sq. foot facility is constantly changing with new shipments coming in daily. GenTech customers receive lifetime phone support for all instruments they purchase.
Get cash or purchase credit for your unwanted laboratory assets!
GenTech buys a wide range of equipment from Agilent, Thermo, Waters, AB Sciex, Shimadzu, Perkin Elmer, and More! Since 1996 GenTech Scientific has purchased used laboratory equipment to refurbish and resell with 1 Year warranties. Our refurbished equipment comes fully tested, and supported long after the manufacturers! If you have old or unused lab equipment in your laboratory that you are looking to sell, contact GenTech and see how we can help you!
Trade-In for Purchase Credit
Apply your trade-in value towards your next purchase! Learn more about Trade-In's.
If you have a trade-in complete the quote request form including the instruments you wish to purchase and the equipment you have to trade. Click here to Request a Quote.
Sell Your Lab Equipment
GenTech is currently interested in purchasing GC, HPLC, MS, LC/MS, ICP/MS equipment and laboratory accessories! Click Here to see a complete list.
To sell your equipment please include the make, model and pictures of the instruments you have to sell. Click here to Contact the Purchasing Department.