Agilent 5973N MSD with 6890 (FID) GC and 2 in 1 Liquid & Headspace Sampler

Agilent 5973N MSD with 6890 (FID) GC and 2 in 1 Liquid & Headspace Sampler

For analysts looking for an all-in-one GC/MS package, the Agilent 5973N MSD benchtop system is the perfect fit. The 5973N is the workhorse of the mass spec world with unmatched reliability, ruggedness, long-life, and service support. Improving on previous models, the 5973N incorporates LAN communication between the instrument and the GC/MS ChemStation.

This Agilent 5973N GC/MSD System with 6890 GC comes fully refurbished and tested at GenTech Scientific.

Features:

• Greater mass stability – better than 0.10 amu over 48 hours
• Performance electronics for 10,000 amu/s scan speed (8,000 amu/s write-to-disk)
• Enhanced software
• RTL-ready (Retention Time Locking, a unique Agilent feature that allows the creation of permanent and universal methods)
• Independently heated transfer line, source, quad
• Proprietary hyperbolic gold-coated quadrupole
• Heatable quadrupole to 200°C
• High energy dynode (HED) and electron multiplier detector

2 in 1 Liquid & Headspace Sampler for GC Systems

You don't need more than one autosampler to automate your GC. The all in one autosampler combines the functions of an autosampler for liquid and headspace in a single unit. The rotating tower leaves the injector port free for inlet maintenance. This approach keeps the samples away from any heated source. In fact, the sample rack is mounted away from the GC oven to prevent exposure to high temperatures, which could cause degradation or condensation in the sample vial.  The robotic vial processing operation allows for sample analysis in a straight forward and systematic way. Sample vials are transported into the heated six-position incubator for preconditioning.

Features: 

• Liquid:
  • Syringe volume:0.5, 1, 5, 10, 25, 50 and 100µl
  • Sample volume: as low as step of 0.1µl
  • Air volume: as low as step of 0.1µl
  • Filling speed: 1-100µl/sec
  • Viscosity delay: 0-15s
  • Bubble elimination: up to 15 pull up strokes
  • Injection speed: 1-100ml/sec
  • Solvent capacity: 6x10ml vials
• Headspace:
  • Syringe volume: 2.5ml (standard); optional: 1ml
  • Syringe temperature: ambient; 40–150℃
  • Sample volume: steps of 0.01ml
  • Sample homogenization: up to 15
  • Sample speed: 0.5–100ml/min
• Comparable to Agilent & CTC samplers
• Easy to use