Thermo TSQ Vantage LC/MS/MS with Accela Front End


  • Thermo TSQ Vantage LC/MS/MS
    • HESI II Source
  • Thermo Accela Front End
    • Autosampler
    • Pump
  • Data System
  • Warranty Coverage


  • MS Sample Introduction - Browse
  • N2 / Air Generator
  • Mass Spec Workbench - Browse
  • Installation & Familiarization
  • Extended Warranty

More details

Request a Quote

Item#: 11039
Condition: Refurbished
Manufacturer: Thermo Scientific

Finance Badge

Thermo TSQ Vantage LC/MS/MS with Accela Front End

The TSQ Vantage meets the rigorous demands of supporting validated methods required for GLP. Whether you are analyzing small molecules or biomolecules, the TSQ Vantage gives you consistent, specific, and reproducible results at amazingly low levels of quantitation.

Thermo Scientific Accela Autosampler Features:

  • Vial Capacity: 200 vials with tray temperature control / Three 96- or 384-well plates
  • Column Oven: 5–95 °C ± 0.5 °C selectable in 1 °C increments
  • Tray Temperature Control: 0–60 °C ± 0.5 °C selectable in 1 °C increments
  • Operating Temperature: 10 °C to 40 °C
  • Power Requirements: 100/120/220/240 Vac nominal; 550VA, 50/60 Hz

Thermo Accela Pump Features:

  • Minimum flow rate: 1.0 μL/min isocratic, 50 μL/min gradient
  • Maximum flow rate: 1000 μL/min
  • Flow rate resolution: 0.1 μL/min
  • Pressure range: 0 to 1000 bar (0 to 14500 psi)
  • Operating mode: • 0 to ~7000 psi (low-pressure range)• ~7000 to ~15000 psi (high-pressure range)
  • Pressure resolution: 0.01 bar (0.15 psi)
  • Solvent capacity: Quaternary
  • Composition accuracy: ± 1% at a flow rate of 25 to 500 μL/min
  • Piston volume: 24 μL
  • Delay Volume: 65 μL (LDA)
  • 100 μL with dynamic mixer
  • Degasser type: Vacuum membrane (Teflon AF)
  • Degasser capacity: 4 channels
  • Degasser volume: < 500 μL per channel
  • Pulse dampener: zero gradient delay volume
  • Wetted parts: 316 stainless steel, titanium, PEEK, sapphire, TZP-ceramic,
  • FEP, GFP, ruby
  • Remote controls: Start, USB interface for data system software
  • Dimensions: 18 cm × 36 cm × 47 cm (h × w × d)
  • Weight: 20 kg (44 lbs.)
  • Power requirements: 100/120 V ac or 220/240 V ac, 50 to 60 Hz, 500 VA max

Quote Request for:
Thermo TSQ Vantage LC/MS/MS with Accela Front End

Please complete the form below to request more information and pricing.

Do you have an instrument to Trade-In?

Full Service Reseller

Original Quality at Refurbished Prices! Our refurbished LC/MS Systems have been expertly restored to meet OEM standards. GenTech Scientific's 60,000 square foot facility stocks an extensive multi-million dollar inventory. We staff knowledgeable sales and service personnel who are committed to help you get the right instrument into your lab. We go beyond the sale with our warranty and continued service options.

We Offer:

  • Warranty Coverage with 48 Hour Response Time
  • Lifetime Phone Support & Remote Troubleshooting
  • Delivery and Installation with Familiarization Training
  • Customized Training to Meet Your Needs
  • Service, Repair, and a Large Inventory of Parts
  • Financing Options: Purchase, Leasing and Rental

How we refurbish used lab instruments

Every refurbished instrument we sell under goes a complete inspection of all electronics and performance review. The instruments undergo in-depth preventative maintenance procedures that include extensive cleaning, detector maintenance, line and pump flushing. Routine maintenance is also addressed and filters, liners, tubing, etc. are all replaced as needed. A full calibration and data verification is performed ensuring our used LC/MS Systems are returned to excellent working condition.

This pre-owned Thermo TSQ Vantage LC/MS/MS with Accela Front End is calibrated to meet OEM standards. Our expert service engineers and chemists can install and custom configure the system to be compliant with the Methods you plan to run.