Shimadzu 8030 LC/MS with 30A UHPLC
Triple quadrupole mass spectrometer plays very important role in trace analysis of complex matrices such as residual pesticide in foods, contaminants in environment, drug concentration in blood and screening of abused drugs. In recent years, UHPLC system has been developed realizing high speed and high resolution, however, analysis speed of mass spectrometer has bottlenecked in combination of UHPLC and triple quadrupole mass spectrometer. The LCMS-8030 meets your requirement by combining Ultra Fast MRM Acquisition and Ultra Fast Polarity Switching. LCMS-8030 enjoys maximum benefit of UHPLC performance and offers analytical speed beyond comparison.
- Fast multiple reaction monitoring (MRM) transition times (dwell times of 0.8 msec and pause times of 1 msec)
- High speed multi-analyte detection with 555 MRM transitions in one second
- Ultra fast polarity switching time of 15 msec)
- An Ultra Fast Scan Speed of 15,000 u/sec Results in a Wealth of Information
With a pressure range up to 130 MPa, high-speed injection, overlapping injection and highly efficient gradient mixing, UHPLC enables ultra-high speed and ultra-high resolution analysis.
SPD-20A Prominence UV-VIS Detector:
The SPD-20A/20AV is a UV-VIS detector that takes sensitivity to the limit (Noise level 0.5 x 10(-5) AU), and offers wide linearity (2.5AU). SPD-20A: Wavelength range: 190 to 700nm.
The SPD-20AV has a mode that allows the deuterium lamp and tungsten lamp to be lit simultaneously, enabling high-sensitivity wavelength-programming detection fro ultraviolet light and the entire visible-light range. Wavelength range 190 to 900nm.
The SIL-30AC autosampler incorporates pretreatment functionalities such as dilution, addition of internal standard and pre-column derivatization schemes. These new features provide unattended operation for increased accuracy, precision and speed for high-throughput work.
The SIL-30AC autosampler achieves excellent injection volume reproducibility for even 0.1 µL injections through use of a high-resolution metering system (6 nL/step) and a precision-engineered valve. The autosampler meets reliability requirements in all analyses from micro to conventional.
LC-30AD Solvent Delivery Unit:
In addition to ultra-high speed autosampler injection, a number of other features have been implemented to achieve ultra-high speed analysis, including overlapping injection, a low volume (20 µL) high-efficiency mixer and optional loop injection system that minimize delay volume, and extremely low carryover without rinsing. These improvements provide ultra-high speed analysis that outperforms all previous models from Shimadzu.
CBM-20A Prominence UFLC Communications Bus Module:
The CBM-20A (Communication Bus Module) is an integrated web-server combines greater flexibility with ease of use. After logging into the system via internet or intranet, the user can create method and sample tables as well as carry out system diagnosis. The actual analysis can be monitored online. In addition, the CBM-20A module contains an internal memory board which stores and safely retains all data even in the case of network failure.
DGU-20A Prominence Degassers:
The Shimadzu DGU-20A5 is an on-line degasser that uses fluoroethylene membrane.
Expertly refurbished used laboratory instruments
Every instrument we sell undergoes a complete inspection of all electronics and performance review. The instruments undergo in-depth preventative maintenance procedures that include extensive cleaning, detector maintenance, line and pump flushing. Routine maintenance is also addressed and filters, liners, tubing, etc. are all replaced as needed. Our chemist perform full calibration and data verification. The once used LC/MS Systems are returned to like-new condition and will run your samples for 30-80% less than OEM pricing.
This refurbished Shimadzu 8030 LC/MS with 30A UHPLC is calibrated to meet OEM standards. Our expert service engineers and chemists can install and custom configure the system to be compliant with the Methods you plan to run.
The GenTech Difference
Why Buy New When You Don't Have To? Our refurbished LC/MS Systems have been expertly restored to meet OEM standards. GenTech is a full service reseller, our knowledgeable engineers perform installations, repairs, training and application setup. The inventory in our 60,000 sq. foot facility is constantly changing with new shipments coming in daily. GenTech customers receive lifetime phone support for all instruments they purchase.
Get cash or purchase credit for your unwanted laboratory assets!
GenTech buys a wide range of equipment from Agilent, Thermo, Waters, AB Sciex, Shimadzu, Perkin Elmer, and More! Since 1996 GenTech Scientific has purchased used laboratory equipment to refurbish and resell with 1 Year warranties. Our refurbished equipment comes fully tested, and supported long after the manufacturers! If you have old or unused lab equipment in your laboratory that you are looking to sell, contact GenTech and see how we can help you!
Trade-In for Purchase Credit
Apply your trade-in value towards your next purchase! Learn more about Trade-In's.
If you have a trade-in complete the quote request form including the instruments you wish to purchase and the equipment you have to trade. Click here to Request a Quote.
Sell Your Lab Equipment
GenTech is currently interested in purchasing GC, HPLC, MS, LC/MS, ICP/MS equipment and laboratory accessories! Click Here to see a complete list.
To sell your equipment please include the make, model and pictures of the instruments you have to sell. Click here to Contact the Purchasing Department.