Agilent 1100 Capillary Pump

$0.00




Includes:

  • Agilent 1100 Capillary Pump (G1376A)
    • CAN Cable
  • In-House Warranty Coverage

Options:

  • Installation & Familiarization
  • Extended Warranty


Boasting Agilent reliability, this 1100 Series capillary pump uses a unique pump technology that optimizes the system for capillary LC, offering a high level of sensitivity and reproducibility. The pump incorporates an electronic flow control (EFC) that measures and controls the actual flow rate, rather than depending on calculations, and assures flow rate stability throughout the analysis. The pump provides flow rates from 1µl/min up to 100µl/min, with full gradient capability for capillary LC and 2.5ml/min in normal mode for a wide range of flexibility. This pump is ideally suited for capillary LC and LC/MS applications, such as bio-pharmaceutical research, where sample volumes are limited and higher sensitivity is essential.

Features:

  • Electronic flow control (EFC)
  • Flow rates from 1 µl/min up to 100 µl/min, with full gradient capability for capillary LC and 2.5 ml min in standard mode for a wide range of flexibility
  • Retention time (RT) stability – independent from column back pressure for maximum performance
  • Accurate flow rates – even with solvent mixtures
  • Automatic purge valve
  • Low delay volume

Specifications:

  • Hydraulic system: Two dual pistons in series, with proprietary servo-controlled variable stroke drive, floating pistons and active inlet valve, solvent selection valve and electronic flow control (EFC) for flow rates up to 100 µl/min
  • Settable column flow range: 0.01 – 20 µl/min, 0.01 – 100 µl/min (with extended flow range kit), 0.001 – 2.5 ml/min (electronic flow control bypassed)
  • Recommended column flow range: 1–20 µl/min, 10–100 µl/min (with extended flow range kit)
  • Column flow precision: < 0.7 % RSD or 0.03 SD, whatever is greater (typically < 0.4 % RSD or 0.02 SD), at 10 µl/min and 50 µl/min column flow (based on RT, default settings)
  • Composition precision: < 0.2 % SD at 10 µl/min, 50 µl/min (with extended flow range kit) and 1 ml/min (default settings)
  • Pressure range: Up to 400 bar system pressure
  • Delay volume: Typically 3 µl from EFC to pump outlet for flow rates up to 20 µl/min; 12 µl from EFC to pump outlet for flow rates up to 100 µl/min; 180–480 µl (system pressure dependent) without mixer for flow rates up to 2.5 ml/min; mixer delay volume 420 µl
  • pH range: 1.0 to 8.5 recommended
Condition

Refurbished

Model

G1376A

OEM

Agilent Technologies

Full-Service Reseller

Original Quality at Refurbished Prices! Our refurbished analytical instruments have been expertly restored to meet rigid industry standards. GenTech Scientific’s 60,000 square foot facility stocks an extensive multimillion-dollar inventory. Our knowledgeable sales and service team are committed to help you get the right instrument into your lab. Our commitment extends beyond the sale with our warranty and continued service options.

GenTech Scientific Offers:

How GenTech Refurbishes Used Lab Instruments

Every refurbished instrument we sell undergoes a complete electronics inspection and performance evaluation. The instruments undergo in-depth preventative maintenance procedures that include extensive cleaning, detector maintenance, line and pump flushing. Routine maintenance is also addressed and filters, liners, tubing, etc. are all replaced as needed. A full calibration and data verification is performed ensuring our refurbished laboratory instruments are in excellent working condition.

Our expert service engineers and chemists can install and custom-configure the system to be compliant with the methods you plan to run.